mpx2300dt1 rev 9, 10/2012 freescale semiconductor data sheet: technical data ? 2005, 2008, 2010, 2012 freescale semiconductor, inc. all rights reserved. pressure high volume pressure sensor for disposable applications freescale semiconductor has developed a low cost, high volume, miniature pressure sensor package which is ideal as a sub-module component or a disposable unit. the unique concept of the chip pak allows great flexibility in system design while allowing an economic solution for the designer. this new chip carrier package uses freescale semiconductor's unique sensor die with its piezoresistive technology, along with the added feature of on-chip, thin-film temperature compensation and calibration. note: freescale semiconductor is also offering the chip pak package in application-specific configurations, which wil l have an ?spx? prefix, followed by a four-digit number, unique to the specific customer features ? low cost ? integrated temperature compensation and calibration ? ratiometric to supply voltage ? polysulfone case material (iso 10993) ? provided in easy-to-use tape and reel note: the die and wire bonds are exposed on the front side of the chip pak (pressure is applied to the backside of the device). front side die and wire protection must be provided in th e customer's housing. use caution when handling the devices during all processes. table 1. pin numbers ordering information device name package options case no. pressure type device marking gauge differential absolute mpx2300dt1 tape and reel 423a ? date code, lot id mpx2301dt1 tape and reel 423a ? date code, lot id pin number 1 2 3 4 description v s s + s - gnd mpx2300dt1 pressure sensors 0 to 300 mmhg (0 to 40 kpa) mpx2301dt1 chip pak package mpx2300dt1/mpx2301dt1 case 423a-03 application examples ? medical diagnostics ? infusion pumps ? blood pressure monitors ? pressure catheter applications ? patient monitoring
mpx2300dt1 sensors 2 freescale semiconductor, inc. pressure the mpx2300dt1/mpx2301dt1 pressure sensors have been designed for medical usage by combining the performance of freescale's shear stress pressure sensor design and the use of biomedic ally approved materials. materials with a proven history in medical situations have been chosen to provide a se nsor that can be used with confidence in applications, such as invasive blood pressure monitoring. it can be sterilized using ethylene oxide. the portions of the pressure sensor that are required to be biomedically approved are the rigid housing and the gel coating. the rigid housing is molded from a white, medical grade polysulfone that has passed ex tensive biological testing including: 10993-5:1999, 10993-10:2002, and 10993- 11:1993. a silicone dielectric gel covers the silicon piezoresistive sensing element. the gel is a nontoxic, nonallergenic elastomer system whic h meets all usp xx biological testing class v requirements. the properties of the gel allow it to transmit pressure uniformly to the diaphragm surface, while isolating the internal electrical connections from the corrosive effects of fluids, such as saline solution. the gel provides electrical isolation sufficient to withstand defibrillation testing, as specified in the proposed association for the advancement of medical instrumentation (aami) standard for blood pressure transducers. a biomedically approved opaque filler in the gel preven ts bright operating room lights from affecting the performance of the sensor. the mpx2301dt1 is a reduced gel option.
mpx2300dt1 sensors freescale semiconductor, inc. 3 pressure maximum ratings operating characteristics table 2. maximum ratings (1) 1. exposure beyond the specified limits may c ause permanent damage or degradation to the device. rating symbol value unit maximum pressure (backside) p max 125 psi storage temperature t stg -25 to +85 ? c operating temperature t a +15 to +40 ? c table 3. operating characteristics (v s = 6 vdc, t a = 25c unless otherwise noted) characteristics symbol min typ max unit pressure range p op 0 ? 300 mmhg supply voltage (1) 1. recommended voltage supply: 6 v 0.2 v, regulated. sensor out put is ratiometric to the volt age supply. supply voltages above +10 v may induce additional error due to device self-heating. v s ?6.010 vdc supply current i o ?1.0?madc zero pressure offset v off -0.75 ? 0.75 mv sensitivity ? 4.95 5.0 5.05 ? v/v/mmhg full scale span (2) 2. measured at 6.0 vdc excitation for 100 mmhg pressure differential. v fss and fss are like terms representing the algebraic difference between full scale output and zero pressure offset. v fss 2.976 3.006 3.036 mv linearity + hysteresis (3) 3. maximum deviation from end-point straight line fit at 0 and 200 mmhg. ? -1.5 ? 1.5 %v fss accuracy v s = 6 v, p = 101 to 200 mmhg ? -1.5 ? 1.5 % accuracy v s = 6 v, p = 201 to 300 mmhg ? -3.0 ? 3.0 % temperature effect on sensitivity tcs -0.1 ? +0.1 %/ ? c temperature effect on full scale span (4) 4. slope of end-point straight line fit to full scale span at 15c and +40c relative to +25c. tcv fss -0.1 ? +0.1 %/ ? c temperature effect on offset (5) 5. slope of end-point straight line fit to zero pres sure offset at 15c and +40c relative to +25c. tcv off -9.0 ? +9.0 ? v/ ? c input impedance z in 1800 ? 4500 ? output impedance z out 270 ? 330 ? r cal (150 k ? ) (6) 6. offset measurement with respect to the measured sensitivity when a 150 k ? resistor is connected to v s and s+ output. r cal 97 100 103 mmhg response time (7) (10% to 90%) 7. for a 0 to 300 mmhg pressure step change. t r ?1.0? ms temperature error band ? 0 ? 85 ? c stability (8) 8. stability is defined as the maximum differ ence in output at any pressure within p op and temperature within +10 ? c to +85 ? c after: ? 1000 temperature cycles, -40c to +125c. ? 1.5 million pressure cycles, 0 to 300 mmhg. ?? ? 0.5 ? %v fss
mpx2300dt1 sensors 4 freescale semiconductor, inc. pressure notes: 1. 2. dimensioning and tolerancing per ansi y14.5m, 1982. controlling dimension: inch. g d1 v n front view m a 12 4 3 detail a ab ad aa f ac back view c l b f k h e j -t- end view dim min max min max millimeters inches a 6.10 6.60 0.240 0.260 b 8.89 9.40 0.350 0.370 c 3.56 3.81 0.140 0.150 d1 0.30 0.51 0.012 0.020 e 2.24 2.59 0.088 0.102 f 3.12 3.25 0.123 0.128 g 1.14 1.40 0.045 0.055 h 0.94 1.19 0.037 0.047 j 0.18 0.28 0.007 0.011 k 3.05 3.56 0.120 0.140 l 2.41 2.67 0.095 0.105 m 4.19 4.45 0.165 0.175 n 5.66 6.07 0.223 0.239 v 2.67 2.92 0.105 0.115 aa 2.41 2.72 0.095 0.107 ab 0.38 0.89 0.015 0.035 ac 3.05 4.45 0.120 0.175 ad 2.54 2.92 0.100 0.115 d2 0.36 0.56 0.014 0.022 style 1: pin 1. v cc 2. +out 3. -out 4. ground d2 detail a package dimensions case 423a-03 issue c chip pak package
mpx2300dt1 sensors freescale semiconductor, inc. 5 pressure table 4. revision history revision number revision date description of changes 9 10/2012 ? added table 1. pin numbers on page 1.
mpx2300dt1 rev. 9 10/2012 information in this document is provided solely to enable system and software implementers to use freescale products. there are no express or implied copyright licenses granted hereunder to design or fabr icate any integrated circuits based on the information in this document. freescale reserves the right to make changes without further notice to any products herein. freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. ?typical? parameters that may be provided in freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. all operating parameters, including ?typicals,? must be validated for each customer application by customer?s technical experts. freescale does not convey any license under its patent rights nor the rights of others. freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/salestermsandconditions. freescale, the freescale logo, energy efficient solutions logo, are trademarks of freescale semiconductor, inc., reg. u.s. pat. & tm. off. xtrinsic is a trademark of freescale semiconductor, inc. all other product or service names are the property of their respective owners. ? 2012 freescale semiconductor, inc. how to reach us: home page: freescale.com web support: freescale.com/support
|
